Publicidad
13. STANDARD ADJUSTMENTS
13. STANDARDEINSTELLUNGEN
13. REGLAGES STANDARD
13. AJUSTES ESTANDARES
I Memory switches 31~58
31 Neutral stop during start backtacking
32
33
34
35
36 Presser foot timer off function setting
37
38
41 Presser lifter operation when treadle
depressed backward
42 Operation when treadle depressed backward
43
44 High-speed pedal operation during
standing operation
45 Delay start during standing operation
46 Presser pedal stopping during standing
operation
47 Variable-speed pedal stopping during
standing operation
48 Presser foot lifting during standing operation
using thread trimming pedal
51 Correction sewing operation
52
53
54 Slow start
55 Presser foot operation when treadle
depressed forward
56
57 Presser foot operation when treadle
depressed forward
58
193
ON Stopping during backtacking possible when treadle is at neutral
OFF Stopping during backtacking not possible when treadle is at neutral
ON (Do not change)
OFF
ON (Do not change)
OFF
ON (Do not change)
OFF
ON (Do not change)
OFF
ON Timer off function disabled
OFF Timer off function enabled
ON (Do not change)
OFF
ON (Do not change)
OFF
ON Presser foot does not rise when treadle is
depressed backward to 1st step from neutral
OFF Presser foot rises when treadle is depressed
backward to 1st step from neutral
ON Backward operation disabled (no thread trimming, needle lifting)
OFF Normal operation (thread trimming, needle lifting)
ON (Do not change)
OFF
ON High-speed operation
OFF Variable speed operation
ON Delay disabled
OFF Delay enabled
ON Stopping not possible using presser pedal
OFF Stopping possible using presser pedal during automatic sewing
ON Stopping not possible using variable-speed pedal
OFF Stopping possible using variable-speed pedal during automatic sewing
ON Always disabled after presser pedal used
OFF Always enabled
ON Correction sewing always possible
OFF Correction sewing disabled after treadle depressed backward
ON (Do not change)
OFF
ON (Do not change)
OFF
ON Slow start always carried out
OFF Depends on panel settings
ON After presser foot is lowered, it does not rise
when treadle is at neutral
OFF After presser foot is lowered, it rises when treadle is at neutral
ON (Do not change)
OFF
ON Presser foot is not lowered when treadle is pressed to 1st step
OFF Presser foot is lowered when treadle is pressed to 1st step
ON (Do not change)
OFF
ZE-8570,8580
Publicidad
Capítulos
