Specific Safety Instructions; Instructions For Start-Up; Positioning; Mounting - stayer CS85 Manual De Instrucciones

This manual is, in accordance with the date of
manufacture of your machine, information that you will
find in the data table of the machine as acquired; look
for updates of manuals for our machines on our website:
www.grupostayer.com
The chain sharpener is foreseen for sharpening usual
sorts of saw chains.
The apparatus is not foreseen for other kind of applications
such as rectifying with cooling liquid, rectifying pieces or
materials that are hazardous to health such as asbestos.
The apparatus is destined for use in the do-it-yourself
sector and has not been conceived for continued
professional use.
The apparatus must be used by adult persons only.
Young person over 16 years may only use the apparatus
when monitored.
The manufacturer does not take any responsibility for
damages caused by use contrary to the rules or inadequate
handling.
1. Index
2. Specific safety instructions ........................... 10
3. Instructions for start-up ................................. 10
3.1 Positioning .......................................................... 10
3.2 Mounting ............................................................. 10
3.3 Illustrated description .......................................... 10
4. Operating instructions ................................... 10
4.1 Operations for adjusting ...................................... 10
4.2 Exchanging tools..................................................11
4.3 General instructions for use .................................11
5. Maintenance and service instructions ......... 11
5.1 Cleaning and maintenance ..................................11
5.2 Repair service ......................................................11
5.3 Guarantee ............................................................11
5.4 Disposal ...............................................................11
6. Regulatory marking ........................................ 11
6.1 Technical features ................................................11
6.2 EU Declaration of Conformity ............................. 12

2. Specific safety instructions

Attention: Do use only grinding wheels and
accessories as
manufacturer.
When using tools or accessories other than
the indicated one, there is a certain risk of causing
injuries. Do not make the apparatus operate without
protective eye shield screen and do not use saw
blades.
Before carrying out works with the apparatus, always
disconnect the power plug. Check the grind wheel
before using it, specifically the distance between
the protective eye shield and the tooth. Do not use
grinding wheels having breaks, cracks or other
damages.
page
recommended by
ENGLISH
10
Connect the apparatus only when safely mounted on
the work surface. There is a risk of suffering accidents.
Danger of suffering accidents!
Use eye and ear protections!
When working with the saw chain, use
protective gloves against cuts and, when
necessary, an apron to avoid cutting yourself.
Keep your hands distanced from the grinding
wheel and from the chain teeth when the
apparatus is in operation. Do not move the
chain by hand. There is a risk of suffering
accidents.

3. Instructions for start-up

3.1 Mounting

The machine must be solidly fixed to the work table by its
3 anchoring points. For this purpose use the two holes 2
putting two screws and two nuts (not included) and the
lower screw of head 6.
3.2 Illustrated description of functions
1. ON/OFF switch.
2. Holes for secure fixing of the machine.
3. Button for adjusting the depth stop.
4. Grinding disk.
5. Operating handle.
6. Sharpener turret.
7. Cutting angle goniometer.
8. Chain guide.
9. Chain fixing rail.
10. Pawl for adjusting the path of the link.
11. Fixing wheels pusher.

4. Operating instructions

4.1 Operations for adjusting

The equipment has 4 settings:
1. Cutting angle setting. Loosen the lower knob of the
head 6 to move the head and position its indicator over
the required angle at the goniometer 7. Selecting 30o
is recommended.
2. Setting the pressure of rail 9. Act upon the lock screw
the
and nut to extract or retract the lever pusher 11. Try
with the chain inserted until you check that it is well
fixed when is disk is lowered.
3. Adjust the path of the pawl 10. Act on the screw that
fixes the arm of the pawl 10. Mount the chain to be
sharpened on the guide 8 and the rail 9 to adjust the
path. The aim is that, when the chain moves to sharpen
a new tooth, the pawl acts as stop so that the tooth is
located in the exact position to become sharpened by
the disk. Thereby loss of time due to tooth-by-tooth
adjustment is avoided. Once advance of the pawl has
been adjusted, all teeth become instantly adjusted.
10