Publicidad
Idiomas disponibles
Idiomas disponibles
START-UP AND OPERATION
1. WARNING: Disconnect the primary pump from
the 115V outlet before touching any component
in the sump basin.
Test the installation for leaks by running water
into the sump basin. The primary pump should
operate normally.
2. Check the controller. The system light should
be green when the unit is plugged into a 115V
outlet.
3. NOTE: When the unit is first plugged in, all
lights will flash and an alarm will sound to verify
proper operation. The charger may not begin
charging for several minutes. When the battery
begins charging, the four lights in the circle will
turn blue, with the battery light flashing blue.
1
2
All lights will be green when
plugged into 115V outlet
3
Flashing blue light
when charging
17
© 2020. All rights reserved.
by
AC
FLOAT
POWER
STATUS
TEST
24/7 BASEMENT
PROTECTION
BATTERY
DC
PUMP
SILENCE
USB
DC POWER
1-800-584-8089
DC
FUSE
+ 15V DC 1.6A
BasementSentry.com
RESET
FLOAT
PUMP
30 AMP
by
P L A T I N U M
AC
FLOAT
POWER
STATUS
24/7 BASEMENT
PROTECTION
DC
BATTERY
PUMP
USB
1-800-584-8089
DC
FUSE
BasementSentry.com
RESET
FLOAT
PUMP
30 AMP
Solid blue light
when charging
by
P L A T I N U M
AC
FLOAT
POWER
STATUS
24/7 BASEMENT
PROTECTION
DC
BATTERY
PUMP
USB
1-800-584-8089
DC
FUSE
BasementSentry.com
RESET
FLOAT
PUMP
30 AMP
TEST
SILENCE
TEST
SILENCE
Publicidad
