Zoeller SENTRY STBB300 Manual Del Usuario página 8

INSTALLATION INSTRUCTIONS
10.Plug the controller into a GFCI-protected 115V
outlet.
Test for backup pump operation by adding
water to the sump basin.
11. Reconnect power to the primary sump pump by
plugging the primary sump pump into the outlet
on the front of the controller.This will will enable
the controller and app to monitor the primary
sump pump.
This step is optional, and you can choose to
plug the primary sump pump into a standard,
GFCI protected outlet. If you use this method,
you will not have the ability to monitor the
primary sump pump.
8
© 2020. All rights reserved.
10
24/7 BASEMENT
PROTECTION
1-800-584-8089
BasementSentry.com
11
GFCI Outlet
by
AC FLOAT
POWER STATUS
TEST
DC
BATTERY PUMP
SILENCE
USB DC POWER
DC FUSE + 15V DC 1.6A
RESET FLOAT PUMP 30 AMP
GFCI Outlet
by
AC FLOAT
POWER STATUS
TEST
24/7 BASEMENT
PROTECTION
DC
BATTERY PUMP
SILENCE
USB DC POWER
1-800-584-8089 DC FUSE + 15V DC 1.6A
BasementSentry.com RESET FLOAT PUMP 30 AMP