Zipro Flame Manual De Uso página 28

EN
ASSEMBLY MANUAL
CAUTION! Follow the steps below during the assembly and use tools supplied with the product.
Prepare sufficient space for the assembly operation.
It is advisable to assemble the product with another person because of the weight of some elements.
STEP 1.
Install the rear (27)
and front base (20) to the main frame (1)
using bolts (28), curved washers (13), spring
washers (15), and nuts (19).
ATTENTION! Remove any plastic
or cardboard safety inserts before
assembly.
STEP 2.
Screw the left and right pedal (22L/ R) to the
crank (21L/R). Screw the right pedal bolt
(10R) on clockwise. Screw the left pedal
(10L) counter-clockwise.
NOTE! The right pedal is marked 'R', and
the left pedal is marked 'L'.
28