Zipro Flame Manual De Uso página 30

EN
STEP 5.
Remove heart rate cables (4) from the post (7)
through the handlebar post (12).
Fix the handlebar (7) to the handlebar post (12) with
the handlebar angle adjustment handle (25),
handlebar cover (10), separator (9), and flat washer
(8) as shown in the picture.
STEP 6.
Connect the heart rate measurement cable (4) and
the computer cable (3) to the computer (17). Fix the
computer (17) to the handlebar post (12) using
screws (2). Make sure every bolt is tight.
Install the water bottle holder (38) on the handlebar
post (12) using the bolt (42) and the flat washer (43).
Make sure the holder is secure and insert the bottle
(37).
Plug in the power supply unit (39) and plug the cable
into the power socket on the front of the mainframe.
39
Congratulations! You have assembled magnetic bike!
Read the manual carefully before using the bicycle.
30