Product Specifications - Permobil ROHO AGILITY CARBON Manual Del Usuario

Important Safety Information, continued
Cautions:
- AGILITY CARBON is intended to be used with an AGILITY CARBON
cover, foam pad, and either the air insert or the foam insert. The air
insert and the foam insert are not intended to be used together.
- Protect the product from blunt force shocks that may cause damage and/
or breakage.
- Use of any hardware or components other than those approved for use
with the product may result in product damage or failure and may void
the warranty.
- The components of the product are not intended to be used separately
from the product or in conjunction with other wheelchair back supports.

Product Specifications

Length (L) in. (cm): Length (L) measurements are taken from the center edge to the center edge between the
10 (25.5); 13 (33.0); 16 (40.5) narrow and wide ends of the back shell. Note: The cover assembly is not included in the length
measurement.
Width (W) in. (cm): Width (W) measurements are taken from the outside of the back cane to the outside of the
14 (35.5); 15 (38.0); 16 (40.5); back cane.
17 (43); 18 (45.5)
Depth (D) in. (cm): Depth measurements are taken from the center, front surface to the highest point of the
Min Contour: 3 (7.5); contoured edge.
Mid Contour: 4 (10)
Weight Range:
The weight range is based on the smallest and largest sizes [in. (cm)]:
2 to 3 lbs. (0.9 to 1.4 kg) smallest: 14 x 10 x 3 (35.5 x 25.5 x 7.5)
largest: 18 x 16 x 4 (45.5 x 45.5 x 10)
Adjustable Back Air Insert:
Width (BW): 3 cells, 6½ in. (16.5 cm)
Length (BL):
3 Cells: 6½ in. (16.5 cm)
5 Cells: 10½ in. (27.0 cm)
6 Cells: 12½ in. (32.0 cm)
Perimeter included in the width and length measurements is ¼ in. (1.0 cm)
Cell Depth (CD) when fully inflated: 1¼ in. (3.0 cm)
Attachment hardware (hardware type):
Cane clamp screw (socket head cap screw): M5 x .08 x 12mm
Angle adjustment screw (flathead socket cap screw): M6 x 1.0 x 20mm / 25mm / 30mm
1 in. = 2.54 cm = 25.4 mm
Materials:
Back shell: carbon fiber
Hardware: aluminum, steel, Zytel
Cover: spacer fabric front and fluid-resistant back and flaps with hook and loop fasteners to secure the cover to the back shell
Foam pad: polyurethane front; polyethylene back; foam insert: polyurethane; air insert: polyether polyurethane front / urethane-coated nylon back
Lumbar Support Pad (optional accessory): polyurethane
Product expected lifetime: 5 years
ROHO AGILITY CARBON Contour Back Support Operation Manual
- Unless otherwise stated in this manual, the product is not intended to be
- Altering the product may affect its performance and void the warranty.
- Prolonged exposure to ozone may degrade materials used in the cover,
3
used with, and has not been tested for use with, other manufacturers'
accessories.
affect the performance of the cover, and void the product warranty.
BW
CD
BL
W
L
D