Troubleshooting; Safety Instructions; Causes Of Malfunctions And Their Rectification - Heiniger Xpert Traducción Del Manual Original

7

Troubleshooting

7.1

Safety instructions

DANGER!
DANGER OF FATAL ELECTRIC SHOCK!
Fatal electric shocks can result from contact with electrically live
conductors or components!
Switch the equipment off before troubleshooting the problem.
X
Repairs to electrical devices must only be carried out by the
X
factory service department or specialists who have been
trained by the manufacturer.
During the warranty period the device must be opened only by personnel
authorised by the manufacturer, otherwise the warranty will be void.
7.2

Causes of malfunctions and their rectification

Malfunction
The upper blade does not
move across the full bearing
surface.
Top blade does not move.
Shearing pressure
adjustment knob is jammed.
Shearing pressure
adjustment knob
automatically releases.
Not enough pressure can be
applied to the upper blade.
Chicken feet fall out.
Motor runs very slowly.
16
Translation of the original instructions / Sheep shearing machine Xpert
Cause
Retaining spring broken.
Eccentric shaft and/or ball
and swivelling fork are worn
(insufficient lubrication).
Bearings are heavily worn.
Defective gear wheel.
Eccentric shaft is broken or
bent.
Ball is missing.
Thread dirty or rusty.
Circlip is jammed.
Circlip missing.
Threaded insert is loose.
Retaining spring broken.
Sliding sleeve is missing.
Sliding sleeve is worn.
Swivelling fork is worn.
Chicken feet are worn.
Securing cams on the
retaining spring are broken.
shearing blades were not
oiled sufficiently.
Motor and/or electronics
defective.
Rectification
Notify customer service.
Notify customer service.
Notify customer service.
Notify customer service.
Notify customer service.
Notify customer service.
Lubricate the shearing
blades.
Notify customer service.