Control Panel - Black and Decker BXAC9001E Traducción De Instrucciones Originales

♦ Use the appliance in a wellventilated area.
♦ If the appliance is used in the same room with other gas
or fuel appliances, it must be well ventilated.
♦ Do not place the appliance in direct sunlight.
♦ Place the appliance on a horizontal, flat, stable surface
away from sources of heat and possible splashing
water.
♦ Do not use or store the appliance outdoors.
♦ Do not expose the appliance to rain or moisture. Water
entering the appliance will increase the risk of electric
shock.
♦ WARNING: Do not use the appliance near water.
♦ Do not force the connecting cable. Never use the power
cord to lift, carry or unplug the appliance. Keep the
device away from heat sources and sharp edges.
USE AND CARE:
♦ Before each use, completely unplug the power cable
from the power supply.
♦ Do not use the appliance if its start / stop device does
not work. Do not remove the legs from the appliance. Do
not move the appliance while it is in use.
♦ Use the handles to take or transport the appliance.
♦ Do not turn the appliance over while it is in use or
connected to the mains.
♦ Unplug the power supply from the mains when not in
use and before performing any cleaning operations.
♦ Keep this appliance out of the reach of children and /
or persons with reduced physical, sensory or mental
abilities or who are unfamiliar with its use.
♦ Do not expose the appliance to extreme temperatures.
Keep the device in a dry, dustfree place protected from
direct sunlight. Never leave the appliance unattended. It
will also save energy and prolong the life of the device.
♦ Any improper use, or in disagreement with the instruc-
tions for use, can be dangerous, voiding the manufactur-
er's warranty and liability.
SERVICE
♦ Make sure that the appliance is serviced only by
specialist personnel, and that only original spare parts
or accessories are used to replace existing parts/
accessories.
♦ Any improper use, or in disagreement with the instruc-
tions for use, can be dangerous, voiding the manufactur-
er's warranty and liability.
(Original instructions)
DESCRIPTION
A Handle
B Control panel
C Air inlet (left)
D Air guide bar
E Wheels
F Remote controller
G Air inlet (right)
H Air outlet
I Outfall
J Inlet grille
K Exhaust pipe assembly
L Window seal plate assembly
M Power cord
REMOTE CONTROL (BATTERIES NOT
INCLUDED)
1 Power button
2 Swing button
3 Wind speed selection button
4 Temperature /Time up and down adjustment
button
5 Mode selection button
6 Timing function button
7 Fahrenheit and Celsius conversion button

CONTROL PANEL

(a) Power button
(b) Wind speed selection button
(c) Adjustment of temperature or time increase /
Farenheit to Celsius conversion.
(d) Mode selection button
(e) Timing function button
(f) Temperature /Timer display window
(g) Remote control receiver window
(h) Fahrenheit or Celsius indicator
(i) Swing mode
(j) Mode indicators
Installation
♦ Be sure to remove all packaging material from inside
the appliance.
♦ Respect the legal provisions concerning safety
distances from other elements such as pipes, electrical
connections, etc.
♦ Ensure that the appliance is level with respect to the
floor.
♦ The appliance requires suitable ventilation in order to
work properly. Leave a space of 50cm between walls or
other obstacles. (Fig 1)
♦ Do not cover or obstruct any of the openings of the
ENGLISH
7