Tunturi Upright Bike Manual De Instrucciones página 4

Step 2: Front Upright Tube Assembly
1. Unravel the Computer Cable (29) and snake it
through the Upright tube Cover (38) and the Upright
tube (2) until the cable connector comes out the top
opening of the upright tube. Slide the plastic cover
(38) onto the upright tube, ensuring the correct orien-
tation of the cover.
2. Install the Upright tube (2) onto the Main Frame (1)
with seven 5/16" x 5/8" Hex Head bolts (51), six
5/16" x 18mm Flat Washers (72) on the side screws
and one 5/16" x 19mm Curved Washer (99) on the
front screw.
2.
English
4