Database Import; Measurement Data Printout - RADWAG R Balances Serie Manual Del Usuario

10.2. DATABASE IMPORT

<IMPORT> function allows transfer of data, recorded in balance databases, from one balance to
another. This is a quick and reliable way for entering the data without any mistakes.
To import the database, plug a flash drive to USB port, next select IMPORT option and choose one
of the following:
The following options are available:
•
Import of all databases
•
Import of users databases
•
Import of products databases
•
Import of tares databases
•
Import of user parameters
The data from ALIBI and WEIGHINGS databases cannot be imported.

10.3. MEASUREMENT DATA PRINTOUT

Balance software allows the user to save data, relating to a measurement, on an external USB flash
drive.
The operation can be performed as follows:
•
Plug a flash drive into USB port.
•
Press button to abandon automatically started <IMPORT/EXPORT> option.
•
Set parameter P4.2.1 <DEVICES/PRINTER/PORT> to <PENDRIVE> option.
•
Return to the weighing mode.
•
From this moment on, every single pressing of the button
measurement data (compatible with the settings for GLP0 PRINTOUT) in a text file, the text file
is automatically created by the balance software. The file name is: printout.txt.
•
Press button to switch the balance off, next remove the pendrive from the port and read
the data on a computer. Keeping to this sequence of actions you are guaranteed that the data
is saved.
More data can be recorded in the same file. The balance software will add the data to the file that has
already been created on a flash drive. Consequently, you can continue saving measurements in the
same file once created.
CAUTION:
USB flash drive shall feature <FAT file system>.
- 36 -
results with record of