RADWAG R Balances Serie Manual Del Usuario página 31

Once the balance is switched on, the display stays active all the time, this enables carrying out mass
measurements even when no user is logged-in.
User parameters, databases and software functions may be edited depending on the access
level granted to a particular user. Access levels are presented in the table below.
Access
Permissions
levels
USER Access to parameters of the submenu <Reading>, permission to change settings for
parameter group <Other> except for <Date and Time>. Permission to start and carry
out all the weighing processes. You can preview information in <Databases> and
define universal variables.
ADV Access to editing parameters of the submenu: <Reading>; <Working modes>;
<Communication>; <Devices>; <Other> except for <Date and Time>. Permission to
start and carry out all the weighing processes.
ADMIN Access to all user parameters and functions, permission to edit databases.
In order to add a user, follow the scheme shown below, add a user and assign a name to him/her.
Once the user name is added, enter the following:
User code – Max 6 characters,
User password – Max 8 numbers.
Next select:
•
Access level (USER, ADV, ADMIN)
•
Language
In order to remove a user you should follow this procedure:
•
Enter the user database
•
Select the user that is to be removed from the list
•
Press button
•
The software shows <DELETE?> message in the bottom line
•
Confirm by pressing
•
When confirmed, the software removes the selected user from the list
button
- 31 -