Installation; Setting Up The Dpx-1300 - Yamaha DPX-1300 Manual De Instrucciones

6 Installation

There are four ways of mounting the projector.
Mounting method
A: From in front of a screen
Placed on a table
B: From behind a semi-translucent screen
C: From in front of a screen
Mounted on the
ceiling
D: From behind a semi-translucent screen
Mounting the projector on a table
A: From in front of a screen
B: From behind a screen (using a semi-translucent screen)
Mounting the projector on the ceiling
There are two kinds of brackets (sold separately: PMT-L31 and PMT-H35), which you can use to mount the projector on the ceiling. Please
consult your dealer for details on their use, and have installation done by either your dealer or a reputable contractor.
C: From in front of a screen
D: From behind a semi-translucent screen
12

Setting up the DPX-1300

Projection method
Place the unit on a table to project and view the image from in front of the screen. Usually,
place the unit on a reasonably high table. The height from the bottom of the unit to the center
of the lens is 12.4 cm (4"-7/8).
Place the unit on a table to project and view the image from behind a semi-translucent
screen. The distance between the projector and the screen should be the same as "A: From in
front of the screen".
• Set the [Location] menu item in the [Setup] menu group to [Rear/Table]. (
Mount the unit on the ceiling to project and view the image from in front of the screen. The
distance between the projector and the screen should be the same as "A: From in front of the
screen".
• Set the [Location] menu item in the [Setup] menu group to [Front/Ceiling]. (
Mount the unit on the ceiling to project and view the image from behind a semi-translucent
screen. The distance between the projector and the screen should be the same as "B: From
behind a screen".
• Set the [Location] menu item in the [Setup] menu group to [Rear/Ceiling]. (
page 27 - 47)
page 27 - 47)
page 27 - 47)