Adjusting image quality using the inline menu
Use the inline menu to adjust image quality without obstructing the image during projection. See "Menu group items and functions" (page 30
- 37) for information on each setting.
<Inline menu composition>
Black Level
Inline menu item
<Inline menu item list>
The menu items available may differ depending on the input signal type.
For video type sources
Black Level
White Level
Gamma
Hue
Saturation
Color Temp.
White Correction
Memo
•
When [Sharpness Type] is set to [0], the [Sharpness Gain] adjustment cannot be performed.
<Example: Using the inline menu>
1. Press the
button when the menu is not open.
Image menu items appear one at a time in the lower area of the screen. If you do not carry out any operations within 5 seconds, the menu
disappears.
Black Level
Gamma
Gamma
2. To close the menu when you have finished making adjustments, press the ESCAPE button.
Memo
•
Press the
button to change between the pages of the [Gamma] menu.
Indicates that you can use the h and g buttons to
change the position of the inline menu.
Parameter adjustment area
Sharpness Gain
Sharpness Type
White Peaking
Iris
Press the h or g button to select an item to set.
A
B
C
D
E
A
a
Press the + or - button to set the item to an appropriate setting.
Press the RESET button to return the item to its default setting.
A
B
C
D
E
A
a
For PC type sources
Brightness
Contrast
Gamma
Color Temp.
White Correction
White Peaking
Iris
Menu operations
9
47