Color Adjustment - Yamaha DPX-1300 Manual De Instrucciones

Hue
(Input signal)
Video/S-Video/Component/RGB TV
Saturation
(Input signal)
Video/S-Video/Component/RGB TV
Sharpness Gain
(Input signal)
Video/S-Video/Component/RGB TV
Sharpness Type
(Input signal)
Video/S-Video/Component/RGB TV

Color Adjustment

(Input signal)
Video/S-Video/Component/
RGB TV/RGB PC/D4 VIDEO
Sets the hue or phase of the image.
• + side (0 to +50) : Shifts the hue towards blue coloration.
• - side (-50 to 0) : Shifts the hue towards red coloration.
Adjusts the degree to which color depth is expressed in the image.
• + side (+100 to + 150) : The unit projects colors with greater depth.
• - side (+50 to +100) : The unit projects colors with less depth.
Adjusts the clearness of the image edges.
Increase this figure to render a sharper image or reduce it to give a softer image with less
image noise.
Choices: 0 to 20
Changes the characteristics of the filter used for "Sharpness Gain"
(described above).
When setting the [Sharpness Gain] parameter to render a relatively strong image (closer to
20), increase this figure to enhance clearness of the image or reduce this figure to enhance
softness of the image.
You cannot adjust this parameter if [Sharpness Gain] is set to [0].
Choices: 1 to 20
Adjusts color balance.
There are three menus, [Standard], [WRGB], and [WRGBYCM], separated in order of
complexity from simple to detailed. By the default setting, the DPX-1300 automatically
selects BT709 (RGB color coordinate for High-Definition Television) for HDTV (High-
Definition Television) or PC video input and BT601 (RGB color coordinate for Standard
Television) for SDTV (Standard Television) input. Refer to page 42 for parameter operation
methods.
The present color temperature setting is displayed to the right of the menu items.
Color Adjustment Standard
- Standard
Adjusts color temperature and hUV
only. hUV adjusts values within the
maximum color temperature limits of the
projector.
Color Temp.
(Input signal)
Video/S-Video/Component/RGB TV/RGB PC
Adjusts color temperature.
Adjusts the level of white in colors between red
and blue, and between green and magenta.
Increase the color temperature to increase the
amount of blue in an image, giving bright color
tones. Reduce the color temperature to increase
the amount of red, giving a darker, more relaxed
atmosphere to the image.
Choices: 5,000 to 10,000
White Correction
(Input signal)
Video/S-Video/Component/RGB TV/RGB PC
Adjusts hUV.
Increasing the hUV setting increases the amount
of green in the image. Decreasing this setting
increases the amount of magenta.
Choices: -0.02 to +0.02
The current color temperature is displayed.
6700K + 0.000uv
-
y
0.5
0.0
0.0
Menu items
W (Color
temperature
and h UV)
0.5 x
Color temprature
adjustment
hUV
+
–
31
9