Kärcher KM 130/300 R D Classic Manual página 30

Clean the centrifugal separator
1 Wing nut
2 Centrifugal separator
 Unscrew the wing nut from the centrifu-
gal separator.
 Clean the centrifugal separator.
Replacing fuses
1 Lock nut
2 Cover fuse box
 Unscrew the knurled nut.
 Open the cover on the fuse box.
 Check the fuses.
 Replace defective fuses.
Note: Only use fuses with identical
safety ratings.
Note: The fuse FU 01 is located in the en-
gine compartment.
FU 01 Main fuse
FU 02 Horn
Hydraulic oil cooler
FU 03 Safety relay
Multifunction display
FU 04 Beacon lamp
FU 05 Safety relay
Time delay
FU 06 Cabin lighting
Wiper
FU 07 Fuel pump
FU 08 Time relay
Seat contact switch
FU 09 Left lighting
FU 10 Right lighting
FU 11 Front work lights (low
beam)
FU 12 Vibrator system
FU 13 Backup signal
EN 12
-
60 A
20 A
10 A
5 A
25 A
10 A
10 A
3 A
7.5 A
7.5 A
10 A
20 A
5 A
29