Service - Cub Cadet Volunteer Manual Del Operador

Service

Headlight Bulbs
1. Raise hood to get access to the headlight assembly.
2. Turn the bulb/socket assembly approximately a 1/4-turn
counter-clockwise to align its tabs with the notches of the
reflector, then remove from the reflector.
Figure 6-1.
3. Unplug the wire harness from the bulb/socket assembly.
4. Plug the new bulb/socket assembly into the wire harness.
5. Align the tabs of the new bulb/socket assembly with the
notches of the reflector and insert the bulb. Turn the bulb/
socket assembly clockwise to lock in place.
6. Lower and secure hood.
24
Figure 6-1
Fuses
1. Unlatch and lift hood forward to get access to under the
dash panel.
2. Remove fuse holder cover. See Figure 6-2.
See
3. Remove the appropriate electrical fuse and replace with
proper amperage fuse.
4. Lower and secure hood.
Figure 6-2
6