34
Seat
The seat must be removed for air cleaner maintenance,
to remove the left side cover, or to access the tool kit
and owner's manual.
Removal
1. Insert the ignition key (1) into the seat lock (2) and
turn it counterclockwise.
2. While the unlock position keep, pull the seat back
and up.
Installation
1. Insert the front prong (3) into the front stay (4) and
the rear prongs (5) into the rear stays (6) on the
frame.
2. Push forward and then down on the rear of the seat.
Be sure the seat is locked securely in position after
installation.
(3)
(5)
(4)
(6)
(2)
(1) Ignition key
(2) Seat lock
(3) Front prong
(4) Front stay
(5) Rear prongs
(6) Rear stays
(1)
Document Compartment
The document compartment (1) is under the seat.
The Owner´s Manual and other documents should be
stored in this compartment.
When washing the motorcycle, be careful not to flood
this area with water.
Never store gloves, raincoats or other objects under
the seat. The air cleaner intake opening may be
blocked adversely affecting engine start and
motorcycle operation.
(1)
Owner´s Manual
(1) Document
compartment