BRAND Transferpette S-8 Instrucciones De Manejo página 56

9 Maintenance
Removing pistons for cleaning or replacement
b.
c.
d.
Operating manual
56
a.
b.
c.
Z
The central guide axis (Z) must not be re-
moved!
d.
Separate the pipetting unit from the
handle.
Rotate both closures of the pipette
housing cover by 90° (e.g. using a
coin) and pull off the pipette housing.
Remove both outer Phillips-head
screws on the shaft unit.
NOTICE
Pull apart and separate the piston
and shaft unit. Remove stroke
springs.
Transferpette® S-8/-12 997208