Midea MAW12HV1CWT Manual Del Usuario página 10

C. Once the panel has been installed on
the side of the cabinet, make sure it sits
securely inside the frame channel by
making slight adjustments. Slide the top
and bottom ends of the frame into the top
and bottom rails of the cabinet. Fig. 3.
D. Slide the panel all the way in and repeat
on the other side.
Your air conditioner is designed to install in standard double hung windows with
opening widths of 23.6 to 38.8 inches (600 mm to 985mm) (Fig. 4A, Fig. 4B).
Lower sash must open sufficiently to allow a clear vertical opening of 13.8 inches
(350 mm).
Fig. 4A
Fig. 4A
INNER
WINDOW SILL
INTERIOR
WALL
Side louvers and the rear of the air conditioner must have clear air space to allow
enough airflow through the condenser, for heat removal. The rear of the unit must be
outdoors, not inside a building or garage. There should be at least 11.8 inches (300 mm)
clearance around the unit. See Fig. 4C & Fig. 4D.
Fig. 4C Fig. 4C
11.8" min (300 mm)
11.8" min
(300 mm)
11.8" min (300 mm)
Outdoor side
 Page 10 
Fig. 4B
Fig. 4B
23.6" to 38.8"
600 mm to 985mm
13.8" min
350 mm
Wooden Windows
Fig. 4D
11.8" min (300 mm)
11.8" min
(300 mm)
11.8" min (300 mm)
Indoor side
Top Rail
Fig. 3
Bottom Rail
INNER
WINDOW SILL
Fig. 4D
11.8" min
Outdoor side
(300 mm)
11.8" min
Indoor side
(300 mm)
Fig. 2
23.6" to 38.8"
600 mm to 985mm
13.8" min
350 mm
Vinyl-Clad Windows
11.8" min
(300 mm)
11.8" min
(300 mm)