Midea MAW12HV1CWT Manual Del Usuario página 19

FRESH operation (on some models):
Press SWING and TIMER buttons
at the same time for 3 seconds
to initiate FRESH feature and the
FRESH light illumiantes on some
models, the LED DISPLAY shows 'On'
for 3 seconds. The ion generatoris
energized and will help to purify
the air inside. Press it for 3 seconds
again to stop the FRESH feature and
the FRESH light turn dark on some
models, the LED DISPLAY shows 'OF'
for 3 seconds for some units.
DISPLAYS
LED Display:
Shows the set temperature in "°C" or
"°F" and the Auto-timer settings. While
on Fan Only mode, it shows the room
temperature. If the room temperature is
too high or low, it will display " HI" or " LO".
The control is capable of displaying
temperature in degrees Fahrenheit or
degrees Celsius. To convert from one to
the other, press and hold the
buttons at the same time for 3 seconds.
Display
Error codes:
The unit may stop operation due to a
malfunction with the unit. If this occurs,
an error code may appear on the display
like below.
Wait 10 minutes as the problem may
resolve itself. If not, disconnect the
power, then connect it again. Turn the
unit on.
If the problem persists, disconnect the
power and contact customer service.
Error code appears and begins with the
letters as the following in the window
display of indoor unit:
EH(xx), EL(xx), EC(xx) , PH(xx), PL(xx),
PC(xx).
NOTICE
If the unit turns off unexpectedly due to
the power being cut, it will automatically
restart with the previous function setting
when the power resumes.
or
 Page 19 