Midea MAW12HV1CWT Manual Del Usuario página 18

2. To operate on COOL mode:
• Choose Cool Mode to set the
cooling function. Use the Up and
Down buttons to choose the
desired temperature. When Cool
Mode is selected, the fan speed
can be adjusted by pressing the
fan button.
3. To operate on Dry mode:
• In this mode, the air conditioner will
generally operate as a dehumidifier.
Since the conditioned space is
a closed or sealed area, some
degree of cooling will continue.
On Dry mode, the fan speed is not
adjustable.
4. To operate on Fan Only:
• Use this function only when
cooling is not desired, such as for
room air circulation or to exhaust
stale air (on some models).
(Remember to open the vent
during this function, but keep it
closed during cooling for maximum
cooling efficiency.) You can
choose any fan speed you prefer.
• In Fan only mode, the temperature
is not adjusted.
5. To operate on HEAT mode (Cooling
models without):
• Choose Heat Mode to set the
heating function. Use the Up
and Down buttons to choose the
desired temperature. When Heat
Mode is selected, the fan speed
can be adjusted by pressing the
fan button.
• If the outdoor side temperature is
below 39°F, the machine will shut
off and display 'LO'.
TIMER button
6
• Press Timer button, the TIMER
indicator light illuminates. lt
indicates the Auto Start or Auto
Stop program is initiated. For
some units, continuing to press the
Timer button will cancel the timer
settings.
 Page 18 
• Press or hold the
to change the Auto time by 0.5
hour increments, up to 10 hours,
then at 1 hour increments up to 24
hours. The control will count down
the time remaining until start.
• The selected time will register
in 5 seconds, and the system
will automatically revert back to
display the previous temperature
setting or room temperature when
the unit is on. When the unit is off,
there is no display.
• Turning the unit ON or OFF at any
time or adjusting the timer setting
to 0.0 will cancel the Auto Start/
Stop timed program.
7
SWING button
Used to initiate the Auto swing
feature. When the operation is ON,
pressing the SWING button can stop
the louver at the desired angle.
Wireless operation (on some models):
• For the first time to use Wifi
function, press the SWING button
for 3 seconds to initiate the Wifi
connection mode. The LED DISPLAY
shows 'AP' to indicate you can
set Wifi connection. If connection
(router) is successful within 8
minutes, the unit will exit Wifi
connection mode automatically and
the Wireless indicator illuminates.
If connection is failure within
8 minutes, the unit exits Wifi
connection mode automatically.
After Wifi connection is successful,
you can press and hold POWER
and DOWN
time for 3 seconds to turn off Wifi
function and the LED DISPLAY
shows 'OF' for 3 seconds, press
POWER and UP
same time to turn on Wifi function
and the LED DISPLAY shows 'On' for
3 seconds.
or button
buttons at the same
buttons at the