General Menu Item Settings; Application Example: Setting The Feed-In Tariff - Fronius Symo Advanced 10.0-3 208-240 Manual De Instrucciones

If no key is pressed for 2 minutes,
-
-
-
General Menu
1
Item Settings
2
3
The available settings are displayed:
The currently selected entry is displayed.
Application Ex-
ample: Setting
the Feed-In Tariff
32
the inverter switches from any item within the menu level to the 'NOW' menu (excep-
tion: 'Standby' setup menu),
the display illumination turns off, unless the illumination has been set to ON in the dis-
play setting (see Display Settings - Illumination).
The power being fed in is shown or the current state code is displayed.
Access the desired menu
Use the 'Up' and 'Down' keys to select the desired entry
Press the "Enter" key
Use the 'Up' and 'Down' keys to se-
4
lect the desired setting
Press the 'Enter' key to save and ap-
5
ply the selection.
Press the 'Esc' key to exit without
saving.
The first digit of a value to be set flash-
es:
Use the "Up" and "Down" keys to se-
4
lect a value for the first digit
Press the "Enter" key
5
The second digit of the value flashes.
Repeat steps 4 and 5 until...
6
the entire value flashes.
Press the "Enter" key
7
Repeat steps 4 - 6 for units or other
8
values to be set until the unit or value
flashes.
Press the 'Enter' key to save and ap-
9
ply the changes.
Press the 'Esc' key to exit without
saving.
The currently selected entry is displayed.
Select the 'Energy yield' setup menu entry
1
Press the 'Enter' key
2