Toto AQUIA IV CST446 Serie Manual De Instrucciones Y Del Propietario página 6

10. Pick up the tank and carefully guide
the water supply hose over the
to-bowl gasket over the inlet of the
bowl, and align the tank bolts over
the bolt holes of the bowl.
11. Using provided tank-tight nuts,
hand tighten the nuts evenly until
tank sets snugly on each of the 3
contact points on the bowl (ill. 8).
Do not overtighten
CAUTION
the mounting bolts.
Overtightening may
break the china and cause
personal injury and/or
property damage.
12.
hose to the angle stop (ill. 9). Make
sure that the hose is free of kinks.
INSTALLATION PROCEDURE
6
ill. 7
Fill valve nut
ill. 8
1
Points of Contac t
Tank-tight nut
ill. 9
50 mm radius minimum Make sure there are no kinks
Flush valve nut
Tank to Bowl
Gasket
3
2