1. Assembly & Use (cont.)
1.3 Harmony
Pump Kit Assembly & Use
®
Caution
• Wash hands with soap and water prior to handling your kit�
• Always inspect breast shields, connectors, valves, membranes
and tubing prior to use for cleanliness�
• Contact your healthcare professional or breastfeeding specialist if
you can express only minimal or no milk or if expression is painful�
See Supplemental Information section 5 for more information�
• Do not try and express with vacuum that is too high and
uncomfortable (painful)� The pain, along with potential breast and
nipple trauma may decrease milk output� See section 5 for more
information�
1 Securely attach
breast shields to
connectors.
Wash hands with soap and water
prior to handling your kit.
3 Push yellow valve
4 Screw collection
heads onto inner
containers onto
ring of connector
connector bottom.
bottom.
10
All manuals and user guides at all-guides.com
2 Snap white
membranes onto
yellow valve heads
until membranes lie
flat.
5 Place oval shaped
base of the stem
into diaphragm.
Correct
Hint: Make sure the oval shape is lined up
correctly in the diaphragm.
7 Insert stem of
8 Center breast
handle assembly
shield over nipple.
into opening on top
(Caution: pushing
of pump body and
shield too firmly into
push until you feel it
breasts may reduce
snap in.
milk flow.)
10 Start pumping in the
11 Once let-down has
Stimulation Phase by
begun, switch to the
pressing down on the
Expression Phase
milk drops symbol
by pressing the back
on front of the
of the pump handle.
pump handle. Press
This mode mimics
and release quickly
baby's deeper, more
until you see milk
relaxed sucking
flow begin. This mode
and is designed to
mimics baby's initial
maximize milk flow.
rapid sucking and is
designed to stimulate
milk flow/let-down.
Incorrect
6 Align silicone
diaphragm/stem with
tab on pump handle.
Press down firmly
around entire edge to
ensure a proper seal.
9 You can rotate the
adjustable handle
for your maximum
pumping comfort.
However, for best
pumping results,
hold the handle
perpendicular to the
bottle. The level of
vacuum is controlled
by the compression
and the speed of the
handle stroke. You
decide the pumping
rhythm that is best
for you.
12 When your
pumping session
is over, store your
breast milk and
clean your kit.
See section 2
for cleaning
instructions.
11