Aesculap Acculan 4 GA334 Instrucciones De Manejo página 17

Issue Cause
Lid cannot be Lid not compatible
attached/removed
Lid deformed/defective
Connection to product
deformed/defective
Battery cannot be Battery not compatible
inserted/removed
Battery deformed/defective
Battery shaft to product
deformed/defective
Sterile funnel or battery Sterile funnel or battery
removal device not removal device not compati-
attachable ble
Sterile funnel or battery
removal device
deformed/defective
Battery shaft to product
deformed/defective
Speed control knob not Product in locked OFF position Safety catch is in OFF position
working
Speed control knob sticks/is
defective
Saw blade not moving Loud running noise from
motor
Insufficient cutting per- Saw blade teeth worn
formance of the saw
Battery too weak
blade
Battery worn out or defective
Symbol "Battery replacement
recommended" illuminated on
the charger
The saw blade cannot be Debris on the saw blade or in
coupled the coupling
Coupling components or saw
blades deformed
-
Saw blade cannot be Saw blade can be pulled out
locked and can be pulled without rotating sleeve action
out during function check
Detection
Lid does not click into place
Lid is difficult or cannot be
mounted/removed
Lid is difficult or cannot be
mounted/removed
Battery cannot be completely inserted
into the battery shaft
Battery is difficult or cannot be
mounted/removed
Battery is difficult or cannot be
mounted/removed
Sterile funnel or battery removal device
not attachable to the battery shaft
Sterile funnel or battery removal device
difficult or not attachable
Sterile funnel or battery removal device
difficult or not attachable
Speed control knob not working
Defective gearings
Blunt saw blade
Insufficient motor power/speed
Debris
Deformation
Incompatible saw blade
Rotating sleeve in incorrect position
(not returning automatically to rest
position)
Remedy
Use the compatible lid for GA334.
Have the manufacturer repair the lid.
Have the manufacturer repair the product.
Use the compatible battery for GA334.
Have the manufacturer repair the battery.
Have the manufacturer repair the product
Use compatible sterile funnel or battery
removal device for GA334.
Change sterile funnel or battery device.
Have the manufacturer repair the product.
Turn the safety catch into the ON position.
Have the manufacturer repair the product.
Have repaired by manufacturer
Replace saw blade
Charge battery
Replace battery
Clean saw blade/coupling with cleaning
template 7
Have repaired by manufacturer
Insert a compatible Aesculap saw blade, see
Accessories/Spare parts
Clean the coupling if it is dirty
If damaged, have device repaired by the man-
ufacturer
15