Aesculap Acculan 4 GA334 Instrucciones De Manejo página 4

Aesculap
Reciprocating saw GA334
Legend
1 Product (reciprocating saw)
2 Trigger (for oscillation frequency control)
3 Safety catch
4 Battery bay
5 Locking pin
6 Sterile funnel
7 Battery
8 Lid
9 Lid release element
10 Battery removal device
11 Saw blade
12 Rotating sleeve
13 Cut-outs (for centering sleeve)
14 Saw blade coupling
15 Cleaning template
16 Support foot
17 Rinsing adapter
18 Opening (at support foot)
19 Marking (at support foot)
20 Locking sleeve (to couple the support foot)
21 Centering pins
22 Inspection hole (for floor of the saw blade coupling)
The depictions are schematic only.
Symbols on product and packages
Caution
Observe important safety information such as warn-
ings and precautions in the instructions for use.
Maintenance label
Indication of the next maintenance appointment
YYYY-MM
(Date: Year-Month)
Machine-readable, two-dimensional code
The code contains a unique serial number which can be
used for electronic tracking of the individual instru-
ment. The serial number is based on the global stan-
dard sGTIN (GS1).
Date of manufacture
Follow the instructions for use
2
Acculan 4
®
®
Reciprocating saw GA334 Aesculap Acculan 4
Labeling of electrical and electronic devices pursuant
to directive 2002/96/EG (WEEE)
Classification Type BF
Oscillation frequency control
Locking sleeve open/closed
Manufacturer's batch designation
Manufacturer's serial number
Manufacturer's article number
Temperature limits during transport and storage
Air humidity limits during transport and storage
Atmospheric pressure limits during transport and stor-
age
S9
Operating mode