Husqvarna WR250/2004 Manual De Uso Y Mantenimiento página 31

All manuals and user guides at all-guides.com
TELAIO
Tipo ..................................monotrave in tubi a
sezione circolare, in acciaio;
telaietto posteriore in lega leggera
SOSPENSIONE ANTERIORE
Tipo .. forcella teleidraulica a steli rovesciati e
perno avanzato (regolabile in compressione
ed estensione); steli ∅ 45 mm
Corsa sull'asse gambe .....................300 mm
SOSPENSIONE POSTERIORE
Tipo ..............................................progressiva
con monoammortizzatore idraulico
Corsa ruota........................................320 mm
FRENO ANTERIORE
Tipo ...........................a disco fisso ∅ 260 mm
con comando idraulico e
pinza flottante
FRENO POSTERIORE
Tipo......................a disco flottante ∅ 220 mm
con comando idraulico e
pinza flottante
CERCHI
Anteriore ........................ TAKASAGO "Excel"
in lega leggera 1,6"x21"
Posteriore (WR 250) .......TAKASAGO "Excel"
in lega leggera 2,15"x18"
Posteriore (CR 250)........TAKASAGO "Excel"
in lega leggera 2,15"x19"
32
FRAME
Type......................................Single-beam with
circular steel tubes; light alloy rear frame
FRONT SUSPENSION
Type ..."Upside Down" forkrod telehydraulic
fork with advanced pin (adjustable in
compression and rebound shoke);
forkrods Ø 1.77 in. dia.
Legs axis stroke ................................. 11.8 in.
REAR SUSPENSION
Type .............................................progressive
with hydraulic single shock absorber
Wheel stroke.......................................12.6 in.
FRONT BRAKE
Type .......................floating disc 10.24 in. dia.
with hydraulic control;
floating caliper
REAR BRAKE
Type..................floating disc 8.66 in. dia. with
hydraulic control;
floating caliper
RIMS
Front...............................TAKASAGO "Excel"
in light alloy. Size: 1,6"x21"
Rear (WR 250) ...............TAKASAGO "Excel"
in light alloy. Size: 2,15"x18"
Rear (CR 250)................TAKASAGO "Excel"
in light alloy. Size: 2,15"x19"
CADRE
Type ...................Mono-axe avec tubulures à
section circulaire, en acier;
cadre arrière en alliage leger
SUSPENSION AVANT
Type ........ à fourche téléhydraulique à tiges
renversées et goujon avancé (reglable en
compression et extension);
tiges Ø 45 mm.
Levée sur l'axe jambes ......................300 mm
SUSPENSIONE ARRIERE
Type .............................................progressive
avec monoamortisseur hydraulique
Levée roue.........................................320 mm
FREIN AVANT
Type .................à disque fixe ∅ 260 mm avec
commande hydraulique;
étrier flottant
FREIN ARRIERE
Type ............à disque flottant ∅ 220 mm avec
commande hydraulique;
étrier flottant
JANTES
Avant...............................TAKASAGO "Excel"
en alliage léger 1,6"x21"
Arrière (WR 250).............TAKASAGO "Excel"
en alliage léger 2,15"x18"
Arrière (CR 250) .............TAKASAGO "Excel"
en alliage léger 2,15"x19"