diversey TASKI swingo 2500 Manual De Instrucciones página 12

Starting the machine using the program button
• By pressing the program button for
the next operation start or work step,
all machine functions are started on
the basis of the functional values last
used.
Notice:
By pressing a button again, the function will be re-
programmed.
Notice:
The set values can be adjusted at any time during
operation.
The values set when the machine is switched off are
stored and will be automatically activated when the ma-
chine is restarted.
Notice:
Pressing the program button when the cleaning
process is finished will start an optimized program
for the end of operation. See instructions on page
12 in the "Automatic process" chapter.
Settings and activated functions are saved.
Cleaning start
• If the machine is switched on and the
operator is sitting in the driver's seat,
the machine will start moving as soon
as the gas pedal is depressed. If se-
lected, the brush unit is started and
the cleaning solution supply is open.
Notice:
The speed is controlled by the position of the gas
pedal. When the gas pedal is released, the machine
will automatically decelerate until it stops and the
parking brake is activated. The supply of the clean-
ing solution will be interrupted, then the brush unit
will be stopped with a delay.
Notice:
The supply volume of the cleaning solution is ad-
justed to the corresponding working speed. (Intelli-
Flow)
Caution:
When working in restricted or narrow areas, it is
recommended to press the slow approach ON/OFF
button. (Display lights up)
This reduces the maximum working speed, thus also re-
ducing the risk of accidents.
• Pressing this button once more will
override this restriction and the dis-
play will disappear.
Power off function
Notice:
The machine turns itself off after 5 minutes when no
longer in use.
During these 5 minutes:
• the brushes may not be manipulated in any way.
• the user must not leave the machine out of sight.
• sucked in or jammed objects may be cleaned from the suc-
tion nozzle only.
• the user is only allowed to leave the machine in order to
clear the work space. The user must maintain visual con-
tact.
Battery capacity - end of operational readiness
The battery level indicator provides information on the available oper-
ating time.
• If the red indicator begins to flash, approx. 2 minutes of
working time are left.
• At machines with automatic brush lowering unit, the brush
motor is switched off and the brush unit is automatically
raised.
At machines with foot pedal, the brush motor is switched
off and the brush unit remains on the ground.
• The red display switches to a continuous light.
• Now you have 10 minutes to drive the machine to the
charging station. Then the machine is automatically
switched off.
• In order to restart, the batteries must be fully charged.
Recycling operation (option)
Caution:
The recycling system is not permitted for high hy-
giene requirements (e.g. hospitals, food-process-
ing companies, canteens, etc.).
Recycling operation is only recommended for slight to
medium soiling.
• Remove the key and actuate the stopping brake.
• Fold the driver seat forwards and open the tank cover.
• Take out the recycling filter from the fresh water tank (Flex-
tank).
• Insert the recycling filter into the recovery tank.
Caution:
Max. permissible water temperature 60°C/140°F.
Cleaning method
Direct working method:
Scrubbing and suction in one work step.
Indirect working method:
Applying the cleaning solution, scrubbing and suction in several work
steps.
Notice:
In some circumstances, certain combinations of
flooring/soiling and cleaning products may impair
the guiding of the machine.
- Optionally available wheels can improve the ma-
chine's traction on the floor. Please contact your TAS-
KI customer consultant.
11