Functional Description; Battery Pack; Commissioning; Mains Adapter - Festool RTSC 400 Li Manual De Instrucciones Original

Cordless orbital sander
Sanding pad
Weight (excl. battery pack, incl. sanding pad)
6

Functional description

[1-1] On/Off switch
[1-2]

Battery pack

[1-3] Capacity display
[1-4]
Extractor connector
[1-5] Speed control
[1-6] Sanding pad
[1-7]
Edge protector
[1-8] Handle (insulated gripping surface)
[1-9]
Mains adapter with plug it connec­
tion*
[1-10] plug it cable*
[1-11] Long-life dust bag
* not on all versions included in the scope of
delivery
The pictures for the functional description are
at the beginning of the instruction manual.
7 Battery pack
Before using the battery pack, check that the
battery interface is clean. Any contamination of
the battery interface may impair correct contact
and lead to the contacts being damaged.
A faulty contact may result in the machine over­
heating or being damaged.
[2B] Remove the battery pack.
[2A]
Insert the battery pack – until it
clicks into place.
2
1
1
2
DTSC 400 Li
4"x 6"
(100 x 150 mm)
2 lb. (1.0 kg)
Further information about the charger and
battery pack with capacity indicator can be
found in the corresponding operating
manual.
8

Commissioning

8.1

Mains adapter

WARNING
Unauthorised voltage or frequency!
Risk of accident
► The mains voltage and the frequency of the
power source must correspond with the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
The mains adapter (available as an accessory
depending on the model) facilitates use of the
cordless sanding technology with mains power,
enabling you to switch between power supply
sources. The mains adapter enables the mobile
dust extractor's automatic electronic switch-
on/shut-off function.
For older mobile dust extractors, the auto­
matic electronic switch-on/shut-off may
only be activated under load and not yet
under no-load speed due to low power
consumption.
► Insert the mains adapter [3A]
► Connect the mains adapter and plug it ca­
ble [3B]
► Remove the mains adapter [3C]
► Detach the mains adapter from the plug it
cable [3D]
English
RTSC 400 Li
3-5/32" x 5-1/4"
(80 x 130 mm)
2 lb. (1.0 kg)
7