9. MAINTENANCE, CLEANING AND CARE
•
After the assembly and before using the home trainer, always make sure that all bolts/
nuts are fully and correctly tightened.
•
Clean the unit regularly with a slightly damp cloth and a mild cleaning agent.
•
This is especially important for the seat and the handles, as these parts are in contact
with parts of your body during the entirety of training.
•
Regularly lubricate the bearing with commercially available grease.
TRANSPORT
•
Due to the heavy dead weight of the device, we recommend asking a 2nd person for
help for transporting the device. Proceed as follows: Place one foot on the front stand
and grip the device on the xed handle below the training computer. Tip the device so
that it glides on the transport roller. To put down the device, put one foot on the front
stand again and let the device glide to the oor slowly.
•
Caution! The transport rollers can cause scratching or similar on parquet oors or other
softwood surfaces. Always place the device on a cloth or mat, and move the device
using the cloth/mat. The retailer or manufacturer is not liable for any damage caused by
nonobservance!
10. NOTES ON DISPOSAL
ENVIRONMENTAL PROTECTION:
Packaging materials are raw materials and can be recycled.
Separate the packaging materials correctly and dispose of them properly in the
interest of the environment. Your local administration can provide additional
information.
Used devices do not belong in household waste!
Dispose of used devices properly! Doing so helps ful ll our responsibility to
protect the environment.
Your local administration can provide information on collection points and
opening hours.
55