End Of Use; Maintenance - Imetec P8403 Instrucciones De Uso

IRONING WITH STEAM
Press the steam request button (13) to iron with steam.
The soleplate temperature LED flashes intermittently while ironing, thereby indicating that the
selected temperature is maintained.
EN
IRONING WITHOUT STEAM (DRY)
If you want to iron without steam, don't press the steam request button (13).
STEAM BOOST
With this function, the product delivers steam continuously.
To activate the "Steam boost" function, quickly press the steam request button (13) three times.
To deactivate the "Steam boost" function, press the steam request button (13) again.
Position the ON/OFF switch (5) to turn the product OFF.
Unplug the power supply cable with plug (7) from the socket.
Wait for the product to cool completely before putting it away.
NOTE: If the appliance is not to be used for several weeks, wait for the appliance to
cool down completely before emptying the water reservoir completely according to the
instructions in the relevant chapter.
When the appliance is switched on again, refill the reservoir as indicated in the relevant
chapter.
EMPTYING THE TANK
Position the ON/OFF switch (5) to turn the product OFF.
Unplug the power supply cable with plug (7) from the socket.
Wait for the product to cool down completely.
Open the water fill cover (1).
Tilt the base of the appliance so that all the water in the tank (3) flows out.
Close the water fill cover (1).
Put the appliance away.
REPLACING THE FILTER
Replace the filter (14) when the filter change indicator light (8A) comes on and the appliance emits a
beep.
Follow the instructions on the filter package.
NOTE: the electronic system modifies steam emission to safeguard the lifespan of the
product. The filter (14) must be replaced as soon as possible.
Failure to replace the filter (14) will invalidate the warranty.
18

END OF USE

MAINTENANCE