Replacing The Light Bulb; Removing The Oven Door - Franke HPM-560 COMBI-5 Manual De Instrucciones

All manuals and user guides at all-guides.com
Replacing the oven light bulb
If you have to replace the oven light bulb,
A B
disconnect the appliance from the power
supply. Remove the glass protection cover
(A), remembering to re-fit it after replacing
the bulb. The bulb must be able to withstand
temperatures up to 300°C and comply with
the following specifications.
Power: 25 W Voltage: 220/240 V~ 50 Hz
Connection: mignon (E14). The lamp used in this appliance is
a 'special purpose lamp' intended only for the usage with this appliance;
it is not intended for household room illumination.

Removing the oven door

The oven door can be removed to
facilitate cleaning of the oven. The ovens
are provided with two hinges with
catches. The hinges A are provided with
B
two catches B.
A
If the catch B is raised, the hinge is
released from its housing. The door can
then be lifted up and taken out, sliding it
towards the outside. To perform this
operation, grip the door on the side near
the hinges. To re-fit, first insert the
hinges. Then, before closing the door,
remember to lower the two catches B
to connect the hinges.