Switching On The First Time; Useful Advice; Operation - Franke CM 981 M Manual De Instrucciones

Ocultar thumbs Ver también para CM 981 M:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
All manuals and user guides at all-guides.com

Switching on the first time

When using the oven for the first time, operate it while empty at its maximum temperature for at least 40 minutes with
the door open, airing the room well and selecting the fan-assisted cooking function
.
The odour noticed during this operation is due to the evaporation of substances used to protect the oven during the
period between manufacture and installation. At the end of this time, the oven will be ready to use.

Useful advice

For successful cooking, never place food in the oven when it is cold; wait until it has reached the set temperature.
During cooking, never place pots or containers directly on the oven floor; place them above the grills or drip-trays
provided, on one of the five shelves available; failure to do so could damage the oven enamel.
Never cover the walls of the oven with aluminium foil, especially in the lower part of the cooking compartment.
Any repairs must be carried out by specialised, licensed personnel.
Contact our nearest service centre and demand only original spare parts.
Your Franke oven uses a special enamel which is easy to keep clean, however it is advisable to clean it frequently to avoid
baking on grime and previous cooking residuals.
NB: - Read the relevant instructions carefully before switching the oven on.

Operation

This oven combines the advantages of "static" natural convection ovens with those of modern "fan" ovens. It is a very
versatile appliance enabling safe and easy selection of different cooking methods. For best use of your Franke oven,
consult the cooking table on page 23.
Settings
Firstly, access the "SETTINGS" menu and update the data shown as required.
Switch the oven on. With the knob C go to "SETTINGS" and confirm by pressing it.
By turning the knob it is now possible to select the date and time, language, control panel brightness, display contrast
and acoustic alarm tone settings.
It is also possible to change the various values and confirm them by pressing the knob C.
Once confirmed, these settings are saved even after the oven is switched off; the settings are saved even in case of a
temporary power failure lasting up to hours 10 hours.
Options
Eco display: when activated, this option reduces the brightness of the display during oven standby, also offering energy
saving.
Display off: when activated, this option ensures that the display is not backlit (for aesthetic reasons and/or energy saving)
when the oven is not working.
SW versions: indicates the oven software version. This is useful in case of any work on the oven by a technician.
Demo: a password must be entered in order to be activated. It allows the oven to be used without activating the heating
elements. Not usable by the end-user.
Manual oven operation
Turn the knob A to instantly access the Self Cooking Modes. Each mode is associated with a recommended temperature,
modifiable as required by turning the right knob.
Once a Cooking Mode is selected, the oven starts to heat up: the display shows the time from the start of cooking.
To reset this time and restart it (e.g. from when food is placed in the oven), press the knob C, then select
and confirm "Reset incremental timer".
The display shows the description of the activated function, which will alternate with the message "PREHEATING" until
the set temperature is reached.
When the set temperature is reached, the oven emits a triple sound twice and the display only shows the description of
the activated function. The thermometer symbol (
) will indicate that the "mercury column" has reached the
maximum level: this is always an indicator of the instantaneous inside temperature (even with the set temperature
reached, a temporary fluctuation with the second-last level of the "mercury column" is considered a normal oven self-
regulating process).
The preset temperature can be changed at any time with the knob C, going from a minimum of 50 °C (except for the
defrost, conventional grill and turbo grill functions - see section "Cooking mode") to a maximum of 270 °C (except for
the defrost, soft cooking (230 °C), conventional grill and turbo grill functions) in steps of 5 °C.
18

Publicidad

Tabla de contenido
loading

Tabla de contenido