Technical Specifications - SPM BIG JUICE Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

The device must be stored in a dry place with
temperatures ranging from 0°C to 40 °C. When
in the original packing, no more than 2 devices
should be stacked on top of each and they must
always be kept upright, as shown by the arrows
on the packing.

5. TECHNICAL SPECIFICATIONS

Technical and electrical specifications
All
the
device's
specifications are stated on the identification
plate applied to the inside of the device and
shown here. The plate also contains the model's
serial
number,
which
manufacturer's
device
progressive
production
consequently
the
produced.
The plate specifies:
Model: XX
n°: XX
Electrical specifications: Volt/ Hz: 230 V /
50 Hz
Max absorption (Watt): 370W
Max. current (Amp): 1.9 Amp
Weight (Kg):42Kg
Climatic class: "N", in accordance with
standard IEC 60335-2-24
Overall dimensions (Fig. 1):
Height: 790 mm
Width: 360 mm
Depth: 600 mm
Noise emissions
The equivalent weighted continuous sound level
is below 70 dB.
th
Issue date: 28
Oct 2009 Revision: IMQ Page : 20/84
technical
and
electrical
is
composed
code
followed
number
week
in
which
Water supply specifications:
The pressure of the water supplied by the water
mains should be kept between 0.1 MPa and 0.6
MPa (1 bar and 6 bar).
In the event of a breakdown:
In most cases any technical problems can be
overcome with small interventions; we therefore
recommend you read this handbook carefully
before contacting the manufacturer or service
centre.
Disposal
Important
All parts of the packing must be kept out of the
of
the
reach of children as they may constitute a
by
a
safety/health risk.
and
it
was
Important
Please respect the environment by disposing of
the packing as instructed.
This symbol:
disposed of as common waste. It must be
handled in compliance with the provisions of
European directive 2002/96/CE (Waste Electrical
and Electronic Devices - WEEE) and the national
legislation derived therefrom to prevent all
possible harm to the environment and creating
health risks.
To dispose of the device correctly, contact the
stockist from which you purchased it or our
after-sales service.
Use and installation manual
means the device cannot be

Publicidad

Tabla de contenido
loading

Tabla de contenido