Positioning; Important - SPM BIG JUICE Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

th
Issue date: 28
Oct 2009 Revision: IMQ Page : 21/84
Fig. 1
Use and installation manual

6. POSITIONING

FOR MAINTENANCE WORKER ONLY
The installation and subsequent servicing
operations must be carried out by skilled
members who have been trained to use the
device
and
in
regulations in force.
a) After removing the packing, make sure the
device is in perfect condition (Fig.1).
b) Rest the device on a sturdy, flat surface
making sure it is well ventilated by leaving a
gap of 20 cm around it and do not install it near
heat sources; we recommend you maintain a
room temperature of between 16 and 32°C.
c) Check that the power mains voltage meets
the specifications on the device identification
plate and that the output available meets the
device's power requirements.
Fit the plug into an earthed socket, removing all
multiple adaptors.
FOR
FURTHER
PRECAUTIONS,
SECTION "CONNECTION TO THE ELECTRICITY
MAINS" CAREFULLY.
d) The installation must be carried out in
accordance with the manufacturer's instructions.
Failure to comply with the positioning and
installation instructions may impair the device's
operation.

Important

You are legally required to provide a suitable
earthing system for the device.
Before carrying out any cleaning and/or special
maintenance on the device, make sure it is
disconnected from the mains by unplugging it.
In the event of a breakdown or malfunctioning,
switch off the device and remove the plug.
compliance
with
READ
the
THE

Publicidad

Tabla de contenido
loading

Tabla de contenido