Wall Fixing; Installation On Stand - aldes InspirAIR Top Serie Instrucciones De Instalación

4.4. Wall fixing

Wall fixing is the recommended mounting method for the unit.
The fastening anchors must be adapted to the support wall and designed to
withstand a load of 120 kg.
4.4.1. Fastening Premium models
- Fix the guide strip to the wall (
1
- Hang the product on the guide strip (
- Check that the product is stable and horizontal.
- Use the fastening stirrup supplied with the product to lock its fastening. Use a fastening anchor (not supplied). (
1
4.4.2. Fastening Classic models
- Drill the lower cradle (BOTTOM) and the top cradle (UP) fastening holes in the wall (see marks on box).
- Screw the bottom cradle in as far as it will go (screws not supplied).
4
- Screw the top cradle leaving it free to slide > screw in the bottom of the J.
- Insert the machine into the bottom cradle.
5
- Push it upwards against the wall.
6
- Slide the top part against the metal plate of the machine.
- Screw into the plate from above.
- Screw the top cradle into the wall as far as it will go.
4
4.5. Installation on stand (in accessories)
Kit 11023484 sold as an accessory is used to install the unit on the ground.
The unit must be fully accessible for servicing.
- Mount the stand kit according to the instructions supplied.
- Check that the unit is held firmly by the stand.
- Refer to the instructions delivered with the accessory for more detail.
) (the cardboard packaging includes a template for drilling the wall to the correct dimensions).
+ ).
1 2
5
x2
2 (B)
19
Torx 20
).
3
3
6
EN