Maintenance And Care - Kärcher ESB 28 Manual De Instrucciones

Transport
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

Danger
Before working on the appliance, switch it
off and pull out the plug of the vacuum
cleaner!
Caution
Risk of damage! Never immerse the electri-
cal suction brush in water or any other liq-
uids while cleaning.
Cleaning the brush roller
Illustration
 Cut hair and threads that have got
wound on the brush roller using a pair of
scissors or just remove them.
Cleaning the rollers
If the rollers of the electric suction brush be-
come difficult to move:
Illustration
 Insert a screw driver into the inlet incli-
nation and prise out the rollers.
Note: While prising, hold your had over the
roller so that the roller doesn't jump off.
 Remove hair or threads that have
wound over the axes of the rollers.
 Re-insert the rollers and ensure that
both the axes have locked in properly.
Downloaded From Vacuum-Manual.com Manuals
10
All manuals and user guides at all-guides.com
Storage
Replacing the brush roller
Illustration
 Loosen the locking hook using a screw-
driver and remove the front hood.
Illustration
 Turn the electrical suction brush and re-
move the housing lid.
 Dismantle the brush roller.
 Pull out the roller bearing and clean it.
 Insert the roller bearing.
 Assemble the brush roller. Ensure that
the gears of the toothed belt match with
the cogs.
 Replace the housing lid.
 Replace the hood and press it evenly
until it locks in.
Troubleshooting
Danger
Before working on the appliance, switch it
off and pull out the plug of the vacuum
cleaner!
The mechanism for protection against
overheating switched off the motor when it
is overloaded, for e.g. because the brush
roller is blocked.
 Pull out the mains plug.
 Check the brush roller for impurities and
remove any objects that may be block-
ing its movement.
 Allow device to cool down.
Wait for approx. 2 minutes before restarting
the appliance.
Warranty
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
– 3
EN