- The pads are equipped with a wear
indicator (3). To check the pad wear,
check the position of the wear indi-
cator (3) while applying the brake.
If a pad has worn to the point that
the wear indicator almost touches
the brake disc, replace the pads in
pairs.
3
WARNING
To replace the brake pads,
it is necessary to contact an
Italjet dealer.
WARNING
After replacing the brake
pads, it is necessary to drive
carefully, braking gradual-
ly to allow the pads to settle
correctly / couple with the rel-
ative discs.
2
EN - 51