Digital Instrument - Italjet DRAGSTER 125 Manual De Uso Y Mantenimiento

2.4.b

Digital Instrument

1) Speed indicator (Speedometer)
km / h - mi / h.
2) Clock.
3) Fuel gauge.
4) Indicator km / mi partial or total
traveled / total or partial hours indi-
cator.
5) Expired scheduled maintenance
warning light.
6) "MODE" button.
7) "SET" button.
Speedometer (1)
Indicates the speed of the motorcy-
cle; the speed can be indicated in
km / h or mi / h depending on how
the unit of measurement has been
set.
Watch (2)
Indicates the time; it can be set with
a 24-hour or 12-hour scale
Fuel Gauge (3)
Indicates the fuel level inside the
tank; completely visible scale (3a)
indicates the maximum level, non
visible scale (3a) indicates the mini-
mum level, the light " " lights up.
1
6
5
Indicator of km / mi of partial or to-
tal distances / total or partial hours
indicator (4)
In this part of the display, it is possi-
ble to view the partial km / mi trav-
eled (TRIP A or TRIP B) and the
relative travel time, the total km / mi
traveled.
Expired scheduled maintenance
warning light (5)
The warning light flashes when
maintenance interval is in 100 km .
The warning light remains steady
when the km / mi of the mainte-
nance interval has been exceeded
and remains steady until reset.
EN - 17
3
2
4
After performing the maintenance,
display TOTAL ODO, then press the
"mode" button (6) for more than 10
seconds; the maintenance indicator
goes off.
MODE button (6)
The "mode" button allows you to
scroll through the software.
SET button (7)
The "set" button allows you to set
the unit of measure and to delete
partial counters.
3a
7