Setting For Miter Cuts - Mafell KSS40 18 M bl Instrucciones De Funcionamiento Y Seguridad

KSS40 18 M bl

5.12 Setting for Miter cuts

Use the following procedure to perform miter
cuts:
1. Secure the workpiece against shifting.
2. Position the machine with the guiding device on
the workpiece.
3. Set the machining angle at the movable sliding
bevel segment 24 on the guiding device.
The angle is indicated on a scale on the
➢
top of the guiding device.
4. Hold the machine at both handles and push the
two stop bolts 25 towards the workpiece.
01/2022
Fig. 25: Placing the machine with the guiding device onto
the workpiece
Fig. 26: Adjusting the machining angle at the guiding device
29