Symbols On The Product - Husqvarna K1 PACE Manual Del Usuario

Product overview K1 PACE Rescue
29
27
1
2
4
3
1. Rear handle
2. Water connection with filter
3. Shoulder strap
4. Belt guard
5. Type plate
6. Ground support front
7. Cutting blade
8. Water nozzle
9. Blade guard
10. Adjustment handle for blade guard
11. Front handle
12. Flange for diamond blade, spindle, arbor bushing
13. Motor air intake
14. Battery slot
15. Power trigger
16. Rear shoulder strap holder
17. Power trigger lockout
18. Accessories On/Off button (not used)
19. On/Off button
20. Control panel
21. Battery release button
22. Water valve
23. Front shoulder strap holder
24. Spindle direction of rotation
25. Battery charger (not included)
4
26
28
10
11
5
6
25
9
12
8
7
26. Battery (not included)
27. Flanges for bonded abrasive blade
28. Combination wrench
29. Operator's manual

Symbols on the product

20
24
23
19
22
13
14
15
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
Personal protective
protection. Refer to
equipment on page 11 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
1598 - 002 - 14.02.2022
18
21
17
16