Quick Guide - Klarstein MELVILLE 3 Manual De Instrucciones

EN
42

QUICK GUIDE

Connected to power supplies
The power supply is 220-240V AC 50Hz
the specification of the socket is 10A 250V AC
The connection of the drain pipe
Put end of the drain into a sink or bucket.
Fix the drain pipe with the back pipe of the machine.The interface is fitted with
clamps and tightened with a screwdriver.
Add water into the dishwasher's tank
There are two ways of prompting the tank that full of water.
1. Before starting:
When the tank is full of water, the machine will beep fleetly for 3 seconds.
2. After starting :
Water is not enough, light is on;
Water is enough, light will be off and the machine will
beep fleetly for 3 seconds.
Remove the larger residue
Please remove the large residue before placing.
or
Fix drain pipe with suction cups