Klarstein MELVILLE 3 Manual De Instrucciones página 63

Connection of drain hoses
The connection of the drain pipe: Put end of the drain into a sink or bucket.
How to drain excess water from hoses
If the sink is more than1000 mm higher than the floor, the excess water in hoses
cannot be drained directly into the sink. It will be necessary to drain excess water
from hoses into a bowl or suitable container that is held outside and lower than
the sink.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid.
water leaks. Ensure that the water drain hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose. It must
be no longer than 4 metres, otherwise the cleaning effect of the dishwasher could
be reduced.
Fix the drain pipe with the
back pipe of the machine.The
interface is fitted with clamps
and tightened with a screwdriver.
oder
Fix the drain pipe with suction cups
EN
63