Maintenance - Husqvarna TS 146XK Manual De Usuario

• When you cut large areas, move the product to the
right during 1 or 2 turns around the work area. This
procedure will keep the grass discharge away from
shrubs, fences and driveways. After approximately
2 turns around the work area, cut in the opposite
direction.
• To get the best cutting result, cut the grass
frequently.
To put the product in freewheel mode
If it is necessary to move or tow the product without aid
from the engine, you must put the product in freewheel
mode.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
16

Maintenance

Read and understand the
WARNING:
freewheel mode on a slope.
• Push in the freewheel control lever (A) to put the
product in freewheel mode.
A
• Pull out the freewheel control lever to operate the
product with the engine.
Do not put the product in
1939 - 003 - 25.08.2022