Skil PWRCORE 20 IW5761B-00 Manual Del Usuario página 15

Impact force mode
displayed
Low-Speed Mode
Medium-Speed Mode 2000
High-Speed Mode
Reverse Control Mode
(RM)
Nut Busting Mode
(NB)
Installing and Removing Belt Clip
(Fig . 7)
Your tool can be used with a removable belt
clip (not included) that can be positioned on
either side of the tool for convenient transport.
To install the belt clip onto the tool:
a. Remove the battery pack from the tool.
b. Align the rib of the belt clip with the threaded
hole on the base of the tool.
c. Insert the screw (not included) and securely
tighten the screw with a Phillips head
screwdriver (not included).
To remove the belt clip from the tool:
a. Remove the battery pack from the tool.
b. Use a Phillips head screwdriver (not included) to loosen the screw (not included) that
attaches the belt clip (not included) to the impact wrench.
c. Remove the screw and the belt clip. Store them in a safe place for future use.
Maximum Impact
Rate (IPM)
1100
2600
1100/2000/2600
>2600
Purpose
Tightening or
loosening small
diameter fasteners
when you need fine
control.
Tightening or
loosening fasteners
when medium torque
and speed are desired.
Tightening or
loosening when high
torque and speed are
desired.
Loosening with auto
stop function.
Loosening with
maximum torque
Fig . 7
Example of
application
Light duty mechanical
repairs.
Conducting
mechanical repairs.
Assembling or
disassembling steel
frames.
Disassembling bolts/
nuts.
Disassembling rusty,
old bolts/nuts.
15