Skil PWRCORE 20 IW5761B-00 Manual Del Usuario página 17

To loosen nuts and bolts
Use the modes listed in the last table in Change the Work Modes to loosen nuts and bolts
depending on the application. When working above ground or working on car tires, to prevent
the loosened fasteners from falling to the ground or into a tight space, it is recommended to
use the reverse control (RM) mode to do this job.
a. Select hex socket that matches the nut or bolt. Then mount the socket onto the square
drive, and fully grip the nut or bolt to be loosened with the hex socket.
b. Hold the tool firmly and apply just enough pressure to keep the socket engaged on the nut
or bolt.
c. Depress the variable-speed trigger switch to impact the nut or bolt. In reverse control mode,
once the fastener is fully loose, the tool will stop running.
17