Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
E N G L I S H
3. INTENT OF USE
The pneumatic 0753 MkII type tool is designed to place Stanley Engineered Fastening speed fasteners (except 1/16" Avlug®)
making it ideal for batch or flowline assembly in a wide variety of applications throughout all industries.
The Hand Tool and Intensifier have been tested as separate items and combined. They must only be used together and for
no other purposes. Refer to "Putting into Service" on page 10 for connection details.
Both models, the 07530 MkII and 07532 MkII are hand-held lightweight tools. Their only difference lies in the location of the
hose entry.
The top entry on the 07532 MkII tool allows suspension from an added mounting plate, see drawing opposite. Part numbers
are shown to order a complete tool including the intensifier and all hoses but no nose equipment.
The pistol number for the 07530 MkII model is 07530-02200 and is 07532-02200 for the 07532 MkII model. See the general
assemblies on pages 20-23.
Both models will place the same fasteners and both will place most repetition fasteners, as shown in the table below.
Both models make use of the same nose equipment. Reference must be made to the Accessories manual (07900-09508)
when selecting compatible components for the type and size of fastener used in your application.
DO NOT use under wet conditions or in the presence of flammable liquids or gases.
FASTENER
NAME
3/32
"
CHOBERT®
GROVIT®
AVLUG®
BRIV®
RIVSCREW®
AVTRONIC®
AVSERT®
NEOSPEED(R)
8
1/8
5/32
3/16
"
"
"
FASTENER SIZE
2.5mm
1/4
3mm
3.5mm
"
2.8mm
O R I G I N A L I N S T R U C T I O N
4mm
6mm
M2.5 4-40 UNC
M3 6-32 UNC
Publicidad
Tabla de contenido
