General Information; General Notes; Product Guide; Symbols Used - Hitachi RPI FSN4E Serie Manual De Instalación Y Funcionamiento

GENERAL INFORMATION

1 GENERAL INFORMATION

1.1 GENERAL NOTES

No part of this publication may be reproduced, copied, filed
or transmitted in any shape or form without the permission of
HITACHI Air Conditioning Products Europe, S.A.U.
Within the policy of continuous improvement of its products,
HITACHI Air Conditioning Products Europe, S.A.U. reserves
the right to make changes at any time without prior notification
and without being compelled to introducing them into products
subsequently sold. This document may therefore have been
subject to amendments during the life of the product.

1.2 PRODUCT GUIDE

1.2.1 Prior check
?
N O T E
Check, depending on the name of the model, the type of air conditioning
system fitted, the abbreviated code and reference in this instruction man-
ual. This Installation and Operating Manual only refers to RPI(M)-(0.6-1.5)
FSN4E(-DU) units.
Check, in accordance with the Installation and Operating
Manuals included with the outdoor and indoor units, that all the
information necessary for the correct installation of the system is
included. If this is not the case, please contact your distributor.
1.3 SAFETY

1.3.1 Symbols used

During normal air conditioning system design work or unit
installation, greater attention must be paid in certain situations
requiring particular care in order to avoid injuries and damage to
the unit, the installation or the building or property.
Situations that jeopardise the safety of those in the surrounding
area or that put the unit itself at risk will be clearly indicated in
this manual.
To indicate these situations, a series of special symbols will be
used to clearly identify these situations.
Pay close attention to these symbols and to the messages
following them, as your safety and that of others depends on it.
!
D A N G E R
• The text following this symbol contains information and instruc-
tions relating directly to your safety and physical wellbeing.
• Not taking these instructions into account could lead to serious,
very serious or even fatal injuries to you and others in the prox-
imities of the unit.
1 PMML0246A rev.4 - 05/2016
HITACHI makes every effort to offer correct, up-to-date
documentation. Despite this, printing errors cannot be controlled
by HITACHI and are not its responsibility.
As a result, some of the images or data used to illustrate this
document may not refer to specific models. No claims will be
accepted based on the data, illustrations and descriptions
included in this manual.
No type of modification must be made to the equipment without
prior, written authorisation from the manufacturer.
1.2.2 Classification of indoor unit models
Unit type (indoor unit): RPI
Position-separating hyphen (fixed)
Capacity (HP): (0.6-1.5)
FS: SYSTEM FREE
N: R410A refrigerant
XXX – XX FS N
In the texts following the danger symbol you can also find
information on safe procedures during unit installation.
!
C A U T I O N
• The text following this symbol contains information and instructions re-
lating directly to your safety and physical wellbeing.
• Not taking these instructions into account could lead to minor injuries to
you and others in the proximities of the unit.
• Not taking these instructions into account could lead to unit damage.
In the texts following the caution symbol you can also find
information on safe procedures during unit installation.
?
N O T E
• The text following this symbol contains information or instructions that
may be of use or that require a more thorough explanation.
• Instructions regarding inspections to be made on unit parts or sys-
tems may also be included.
4 : Series
E : Made in Europe
-DU:Drain Up (RPIM only)
4 E -DU