cecotec BOLERO HEXA V 3000 BLACK Manual De Instrucciones página 43

ENGLISH
Note
Modifying the cooking mode, temperature or time may have negative consequences on
the cooking results, we strongly recommend that you do not do this unless you are very
experienced in cooking.
Warning
After turning on the device, it will become very hot, especially inside. Never touch the
-
internal surface of the device nor the heating elements. Use oven gloves to remove
accessories or cookware from inside, and allow the device to cool down after every use.
Keep children at a distance while using the oven to prevent any burn risk.
-
Child lock
This device features a child lock so children do not turn on the oven or modify the settings
-
accidentally.
Hold down the Start/Pause button for 3 seconds to activate or deactivate the child lock
-
function.
Energy save mode
On standby mode, after 10 minutes of inactivity, the oven will automatically enter the
-
energy save mode. You can also activate this mode if you hold down the On/Off button for
3 seconds.
On the energy save mode, press any button to access to the standby mode again.
-
Steam cleaning function
Remove the water tank, add water and half a packet of citric acid (not included) to the
1.
water tank, mix it well and place the water tank back in the slot.
On standby mode, press the automatic menu button once and access the Steam cleaning
2.
function with the slider bar or press buttons +/-, and the display will show dE5.
Press the Start/Pause button to start this function. When the countdown reaches 08:00
3.
min, the oven will indicate there is no more water.
Remove the tank, add water and place it back in its slot. Press the Start/Pause button to
4.
continue using this function.
Delay end function
Once you have set the time, press the Delay end function button to stablish the cooking
1.
end time.
Select the function (this function is not available with the automatic menu and fast
2.
preheating functions), set the time, temperature and cooking steam, and press the Start/
Pause button to stablish the delay end.
Press the Delay end button to check the stablished time.
3.
84
Exact temperature function
On any mode, introduce the short end of the probe on the oven display and the long end on
-
the food and insert it in the oven.
Select the grill function (on any of these modes: Conventional, Upper double heating
-
element + Fan, Convection), set the probe temperature with buttons + and - and press the
Start/Pause button to start the function.
When the temperature on the food centre reaches the temperature set on the probe, the
-
cooking process will stop and it will return to the standby mode.
Warning
When you use the meat probe, make sure you introduce the end on the meat.
-
Use only the meat probe provided with the oven.
-
Steam
When the oven is on standby mode, press the Steam button to add steam after selecting
-
the cooking options.
You can increase steam manually by pressing the Steam button during the cooking process.
-
The default steam level is level 1.
-
Warning
There are three steam levels, the amount of steam will increase as the level increases.
-
Press the Steam button once to see the default level, that is, level 1. Press the Steam
button twice to set level 2 and three times to set level 3. The display will show the level
(L1/L2/L3). Press the Steam button four times to cancel the Steam function and the steam
level light indicator will turn off.
Due to vibration during transport, the water tank may not be correctly placed after
-
removing the product packaging. Remember to place it correctly.
Water tank
You can fill the water tank with two different processes:
Press the water tank button and remove it, then, remove the sealing cap and add water.
1.
Fig. 6
Press the water tank button and remove part of the tank, remove the sealing cap and add
2.
water. Fig. 7
Notes
When the cooking process ends, pour the remaining water on the water tank and dry it.
ENGLISH
85
HEXA V 3000 BLACK